<aside> 📌 This page contains the list of total materials of the wooden Purdue RoboMaster 1v1 field.

</aside>

Walls:

There are 12 wall segments that fit together to make the field perimeter. They are labelled on their top side with the following:

AR, AM, AL

BR, BM, BL

CR, CM, CL

DR, DM, DL

The letters signify side name (sides A, B, C, D) and orientation (R (right), M (middle), L (left)).

24 Pegs - These go in the holes to connect wall segments to each other.

Obstacles:

Bunkers 1 & 2 - These are the rectangular wooden obstacles that go in the middle of the field.

Cinder blocks and cement bricks - These are used to weigh down the bunker obstacles in order to ensure they do not topple or move during competition.

Other:

PVC Piping - This is used to construct a lattice around the field to drape mosquito netting from.

Mosquito Netting - This is draped over the PVC structure in order to protect bystanders from projectiles flying outside the field due to the robots shooting.

(3?) Mats - These are put on the floor before the field is assembled and taped down in order to protect the floor and it also provides a uniform surface for the robots to drive on.